Feltec MO 250 Aluminum Finish


Product Description

Feltec Aluminum Finishing MO 250 is a modified phenolic alkyd resin metallic coating with aluminium pigment.

Packing Size


Theoretical Coverage

14 X 16 ml / liter per coat.
 Color Options:
Colour Refer to color card
Specific Gravity Approximately 1.0
Finish Metallic Shine
Flash Point About 35°C


Feltec Aluminium Finishing MO 250 is suitable for use on all types of soft and hard woods for both interior and exterior use especially those which are highly resinous.

Recommended Dry film Thickness 25 ~ 30 microns
Drying times Touch Dry : ½ - 1 hours
Hard Dry : 8 hours
Recoating Interval Min : 8 hours
Theoretical coverage 14 – 16 m² / liter per coat 
Volume Solids Approx. 32%


Application Method Brush/ Roller/Spray Gun
Mixing Ratio (by volume) The paint is ready for use after proper stirring. If thinning is required, add 5% of Federal General Thinner MO-464 for easy application.
Thinner / cleaner Federal General Thinner MO-464
Surface Preparation Surfaces must be dry, clean, sound and free from any loose material, dirt, grease or wax.


Storage The product should be kept in a cool and well ventilated place protected from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 5 liters