Acrylshield

Product Description

 ACRYLSHIELD is a premium low sheen water-borne acrylic coating, which is formulated for exterior masonry application. ACRYLSHIELD is pigmented with light stable colorant that provides a smooth and highly decorative finishing with good durability and weathering properties against ultraviolet degradation and fungus growth. 

Packing Size

1L (MCS only), 5L (MCS & Ready Mixed), 20L.

Theoretical Coverage

11 ~ 13 ml / liter per coat
 Color Options:
Colour Refer to Acrylshield 100% Acrylic Exterior Finish Paint colour card
Specific Gravity Approximately 1.25 – 1.40
Finish Low sheen
Flash Point Non-flammable

 Acrylshield is specially formulated for use on exterior concrete and masonry surfaces.
Recommended Dry film Thickness 30 ~ 40 microns
Drying times Touch Dry : 15 - 30 minutes
Recoat Min : 1-2 hours
Theoretical coverage 11 – 13 m² / liter per coat
Volume Solids Approximately 40~45 %
Application Method Brush/ Roller/Spray Gun
Mixing Ratio (by volume) The paint is ready for use after proper stirring. If thinning is required, water may be added up to a max 5%.
Thinner / cleaner Water
Surface Preparation Surfaces must be dry, clean, sound and free from any loose material, dirt, grease or wax.
Storage The product should be kept in a cool and well ventilated place protected from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 1L (MCS only), 5 (MCS & Ready-mixed) & 18 liters
Back
© 2023 Federal Paints Manufacturing (M) Sdn Bhd. (0381688T / 199601009340) All Rights Reserved.