Feltec E500 Etching Primer 


Product Description

Feltec Etching Primer E500 is a one-component acid-catalyzed Polyvinyl Butyral based etching primer for aluminum, galvanized steel or corrosion free steel surface to enhance adhesion of subsequent paint coatings.


Packing Size

5L.

Theoretical Coverage

10 X 10 ml / liter per coat.9
 Color Options:
Colour Semi-transparent
Specific Gravity Approximately 0.90
Finish Semi gloss
Flash Point About 21°C

 

 Feltec Etching Primer E500 is specially designed for use on galvanized and non-ferrous surfaces, e.g. aluminum, brass, zinc and galvanized surface.

Recommended Dry film Thickness 10 microns
Drying Time (at 27ºc) Touch Dry : 15 minutes
Hard Dry : 1 hour
Recoating Interval Min : 3 hours
Max : 8 hours
Theoretical coverage 9 ~ 10 m² / liter per coat

 

Application Method Brush/ Roller
Thinner / cleaner Federal General Thinner MO-464
Surface Preparation Surfaces must be dry, clean, sound and free from any loose material, dirt, grease or wax.

 

Storage The product should be kept in a cool and well ventilated place protected from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 5 liters