Feltec Vinyl Floor Paint

Product Description

 Feltec Vinyl Floor Paint is top quality vinyl paint specially formulated to provide excellent, durable and washable finish on asbestos roofing tile, cement floor, brickwork, hard and softboards.

Packing Size

5L.

Theoretical Coverage

9 X 10 ml / liter per coat.
 Color Options:
Specific Gravity Approximately 1.20
Finish Low sheen
Flash Point Non-flammable

 Feltec Vinyl Floor Paint is designed for use on asbestos roofing tile, cement floor, brickwork, hard and soft boards. Best to apply Feltec Sealer 1011 (Solvent- based Sealer) if high moisture is present, prior to apply this Feltec Vinyl Floor Paint.
Recommended Dry film Thickness 30 ~ 40 microns
Drying Time  Touch Dry : 30 minutes
Hard Dry : 1 hours
Recoating Interval Min : 2 hours
Theoretical coverage 9 ~ 10 m² / liter per coat
Volume Solids Approximately 35 %
 
Application Method Brush/ Roller/Spray Gun
Mixing Ratio (by volume) The paint is ready for use after proper stirring. If thinning is required, water may be added up to a max 5%.
Thinner / cleaner Water
Surface Preparation Surfaces must be dry, clean, sound and free from any loose material, dirt, grease or wax.
Storage The product should be kept in a cool and well ventilated place protected from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 5 liters
Back
© 2023 Federal Paints Manufacturing (M) Sdn Bhd. (0381688T / 199601009340) All Rights Reserved.