Feltec Floor Varnish

  

Product Description

Feltec Floor Varnish 7575 is a special varnish for the decoration & protection of all interior timber surfaces. It is water resistant. It will not crack, peel or blister.

Packing Size

1L & 5L.

Theoretical Coverage

15 X 18 ml / liter per coat.
 Color Options:
Colour Clear
Specific Gravity 0.87 – 0.91
Finish Gloss
Flash Point About 21C

It is suitable for use on parquet, wood furniture, paneling and door
Recommended Dry film Thickness 25 ~ 30 microns
Drying Time (at 27ºc) Touch Dry : 1 – 2 hours
Hard Dry : 6 hours
Recoating Interval Min : 8 hours
Theoretical coverage 15 – 18 m² / liter per coat
Volume Solids Approx. 35%

 
Application Method Brush/ Roller/Spray Gun
Mixing Ratio (by volume) The paint is ready for use after proper stirring. If thinning is necessary, add 5% of Federal General Thinner MO-464 for easy application.
Thinner / cleaner Federal General Thinner MO-464
Surface Preparation Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease etc. All surfaces should be thoroughly rubber down in the direction of the grain, using a suitable abrasive paper and then dusted off.

 
Storage The product should be kept in a cool and well ventilated place protected from direct sunlight. Container must be kept tightly closed.
Handling Handle with care. Stir well before use.
Shelf life 12 months
Packing Size 1 & 5 liters

 
Back
© 2023 Federal Paints Manufacturing (M) Sdn Bhd. (0381688T / 199601009340) All Rights Reserved.